Corel WordPerfect 7 Macro Programming Example

Case study:
A secretary using Corel WordPerfect 7 is often required to carry out calculations and insert the values into invoices or other documents.

She does this by entering calculations into either a real calculator and transcribing the answer, or the Microsoft calculator and copying then pasting the result into the document. Doing this affects her productivity as this process increases the time taken to complete work and wastes time in correcting inevitable errors that occur.

Proposal:
A secretary has asked for software to be written which enables her to do calculations and, if required, convert standard numbers to values of currency as a simple operation within Corel WordPerfect 7.

Feasibility study:
Having analysed the problem outlined above this operation is ideally suited for automation. A solution based on a macro would be advisable to the existing methods in place. The saving in time and increased productivity makes the proposed system a practical and effective alternative to the current manual system.

User Requirements:
The user needs to enter calculations into a new or existing document at different stages throughout the creation of the text. The user also requires that the macro does not change the formatting of the document in any way.

The user requires the ability to select the following options for formatting the output:1) Displaying a sum in standard numbers or currency.
2) Displaying a sum using a minus sign or brackets to show negative figures.
3) Optional use of commas where required.

Specification:
Applications software to be used: Corel WordPerfect 7.

Purposes of using macro: Calculate the sum of any numerical data specified by the user.

Data to be embedded in macro: Any numerical data entered by the user.

Use of macro: Accelerate processing of data therefore increasing productivity, by cutting out the additional keystrokes needed to run the calculation manually.

Solution:
A macro that uses the table feature in Corel WordPerfect 7 to carry out the required mathematical operations then insert the result in place of a calculation entered as a formula. This solution will take between one to three seconds to complete any operation, running on a correctly configured and fully operational system of the description specified below.

Design of the system
Taking into consideration the needs of the user and the resources available in the execution of the macro in this environment. I have derived an algorithm that meets all the requirements outlined above. The specification for the stand alone programmable system needed is as follows:

Typical configurations required:
16 Megabytes of RAM.
Microsoft compatible mouse.
Corel WordPerfect 7.
The macro file.
155 MHZ Pentium processor.
1 Gbyte hard disk capacity or Windows 98.
Microsoft compatible keyboard.
DOS 6.0 or better.
Windows 95

Method of input:
Keyboard, numerical characters or key pad.Capture method: Transfer to clipboard.Input data:Any numerical data entered by the user.Output data:The sum of a calculation in numerical form.

Method of output:To VDU at the point of input data.

Using this specification I have written an algorithm that makes effective use of the resources available in Corel WordPerfect 7.

Algorithm for applications software macro:
[1] Check for input.
[a] Exit if none found.
[2] Select formula.
[3] Create a one cell table.
[4] Insert an equals sign before the formula.
[5] Calculate the table.
[6] Verify that result is not invade.
[a] Exit if error found (=5+6e).
[7] Request user input (formatting).
[a] Exit at user request (presses cancel).
[b] Revert operations & clean up.
[8] Format the output:
[a] Standard numeric.
[b] Currency.
[c] Use commas.
[d] Use negative format.
[8] Delete the table leaving the solution in place of the originally entered formula.Software development

The solution to the algorithm stated above in the form of a macro that meets all the requirements identified in the analysis is as follows:

Macro script:
// Macro: Automath.wcm// Written in: Perfect Script// Purpose: Calculate the sum of numerical data // Compiled: 5/09/04// © 1998 Michael Hart//=================================================// Identify compiler, application to useApplication (A1; "WordPerfect"; Default; "UK")

If (?DocBlank) Condition executed if document blank // Go to subroutine oninput go(oninput) endif

// Select data block left of insertion pointSelectwordprevious ()// Condition executed if no data foundIf (?SelectedText="") // Go to subroutine error go(error) endif // Convert selected data block to a tableTableconvertfrom (type: tabularcolumns!)// Set default table styleTableCellNumberFormat (FormatType: General!)// Turn off Update associated charts optionTableupdateassociatedcharts (state: off!)// Insert an equal sign left of data blockType (text: "=") Tablecalculate () // Calculate formula values in the table

// If formula syntax is invalid go to elseIf(?CellFormula) // Display menu dialog box DialogShow(5001;"WordPerfect") // Condition executed if user presses cancel If(MacroDialogResult = 2) // Revert the last operations Undo(1) // Move insertion point to end of data bock PosWordNext () // Go to subroutine end Go(end) Endif

// Condition executed if currency is definedIf(currency) // Specify format data as currency [£00.00] TableCellNumberFormat (FormatType: Currency!) TableCellNumberNegativeNumber (NegDisplayType: Minus!)Endif

// Condition executed if negatives definedIf(negatives) // Specify negative format [(9)] Tablecellnumbernegativenumber (negdisplaytype: parentheses!)Endif

// Specify commas are not usedTableCellNumberUseCommas (State: No!)

// Condition executed if commas definedIf(commas) // Specify format data using commas [2,000] TableCellNumberUseCommas (State: Yes!)Endif

// Select the table. Tableselecton (selectionmode: table!)// Select all cells in the current tableSelecttable ()// Delete table convert contents to documentTabledeletetable (delwhat: converttotabs!)// Move insertion point to end of data bockPosWordNext ()// Go to subroutine end Go(end)// If formula syntax is invalid thenElseendif

// Identify the subroutine errorLabel(error) // Display error message box in event of invalid formula MessageBox (; "AUTOMATH UNABLE TO COMPLY";"Invalid data exists in formula. Sequence terminated."; IconStop!)// Delete table convert contents to documentTabledeletetable (delwhat: converttotabs!)// Delete character right of the insertion pointDeleteCharNext () // Go to subroutine endGo(end)

// Identify subroutine oninput.Label(oninput) // Display error message box in event of blank documentMessageBox (; "AUTOMATH UNABLE TO COMPLY"; "No input provided! Sequence terminated."; IconStop!)

// Identify the subroutine endLabel (end) // End macro Quit //====================================================

Implementation:
Preliminary diagnostics:After running the macro on a system of the same specification to that of the system it is intended to be implemented, the preliminary diagnostic tests show the operational time to remain within the range predicted during the analysis.

The following tests were performed to confirm that the macro meets all of the requirements under real conditions.

Tests to be applied:Test # one of basic macro:1) Find an individual that knows nothing about this macro.

2) Observation of this individual doing the following:

[a] Easily using the instructions.

[b] Load Corel WordPerfect 7.

[c] Enter valid numerical data.

[d] Access the macro file.

[e] Run the macro.

[f] Repeat steps [c] to [e] using all possible combinations of the options.Ideally, the individual should be able to do the above with no assistance.

3) Observation of the macro running as intended in all conditions.

Basic test conditions:Valid Input: Output: Invalid Input: output: [a] 5-5 0 [a][nothing] Error[b] 2+2 4 [b] qwerty Error[c] 2-4 -2 [c] 2gh+32 Error[d] 100*200 20000 [d] !"£$% Error[e] 50/1 50 [e] 1+4-1$ Error[f] 1+2-3*4/5 0.6 [f] one*two Error[g] 12345 £12,345.00 [g] a1-d3 Error (??)

Test # two of debugged version:

1) Release the software on the LINK bulletin board system (run by Legalease) for evaluation by it's users. (the LINK is a special network for lawyers who often need maths functions in written work).

2) Collect commentary from the people willing to help.

3) Investigate and implement any changes or revisions necessary.

Maintenance:
Commas appear in values of currency regardless of the settings.This bug has been successfully corrected.

I am the website administrator of the Wandle industrial museum (http://www.wandle.org). Established in 1983 by local people to ensure that the history of the valley was no longer neglected but enhanced awareness its heritage for the use and benefits of the community.